ME-D400 / D400gps
The new me-d400 Mobitex* modem for mission critical data applications.
The me-d400 is the only 10 Watt Mobitex device currently available in Europe. The new improved me-d400 provides a more efficient RF design that offers a flexible wideband 405Mhz to 465MHz platform with direct RS232 interfacing. Simplified accessories, ignition sense and integral GPS options ensure greater choice and improved control.
This unique 0.1-10 watt device offers rugged construction ideal for mobile environments such as vehicle fleets. It is also well suited to remote and varied locations, where communication of critical data is an essential part of business and where an integral GPS can provide accurate vehicle or mobile asset tracking and security.
The me-d400 comes with in-built safety protection systems and compliance to the latest vehicle electrical disturbance and electromagnetic interference standards. Most significant is an all new rugged enclosure to safely house and protect the delicate electronics.
*Mobitex is a packet switched data transmission system, which gives high reliability and security of data transmission for a wide range of markets, from M2M to fleet management.
Find out more about the Mobitex network here.
- Wide-band 405 to 465MHz.
- Full 10 Watts (0.1 - 10W).
- Reverse polarity protection.
- Conforms to R14N Mobitex Standard.
- Standard 9-pin RS232 port and 25-pin DM200 interface.
- MiniApp2 functionality.
- Internal GPS option with ignition sense.
- Ideal replacement for DM200.
- Meets ISO7637.
- Fully CE and VCA approved.
| General |
|
| Performance specification: |
R&TTE: 1999/5/EC
BS EN 60950-1
ETSI EN 300-113-2
BS EN 50731
ETSI EN 300-489-5
MIS 8KR14N
ISO 7637-1
Vehicle Directive 95/54/EC |
| Frequency range: |
405 - 465 MHz Transmit and receive |
| Channel spacing: |
12.5KHz |
| RF output: |
10W max. +/- 2dB |
| Modulation: |
Modified GMSK - F1D |
| Antenna connector: |
BNC (female), GPS Antenna SMA |
| Weight: |
495g |
| Dimensions: |
162 x 85 x 35 mm |
| Mounting: |
By four M4 clearance holes in base tabs of unit. |
| Interfaces: |
DC, RS232 by 9 pin D-type, Data input / output by 25 way D-type, RF by TNC female, optional GPS by SMA female. |
| Electrical |
|
| Power supply: |
12V dc nominal
10.8VDC minimum
15.6VDC maximum |
| Current consumption: |
TX 2.6A at 10W output, 1.8A at 5W, 0.9A at 1W
RX 180mA RS232 9 pin D-Type (230mA using 25 way D-Type)
Values based on 12V |
| Transmitter |
|
| Carrier power: |
0.1 - 10W software controlled |
| Receiver |
|
| Sensitivity (1 in 100 bit erro rate): |
<-113dBm (nominal)
<-110dBm (extreme) |
| Channel switching time: |
<30mS |
| RSSI / Signal strength indication: |
-113dBm to -63dBm |
| Environmental: |
|
| Operating temperautre: |
-30 deg C to +60 deg C |
| Storage temperautre: |
-40 deg C to +85 deg C |
| Enclosure: |
IP54 rated |
« Back to list
|
| |
|
Downloads: